Iranian Company Produces Regulation System for High-Pressure Gas Stations

Due to the fact that the existing turbine meter for measuring the volume of gas consumption alone cannot measure gas consumption in high-pressure stations, a regulation system is used to accurately calculate the consumption of gas.

The gas temperature and pressure regulator is a converter that measures the gas volume in base conditions according to the volume in conditions that include temperature, pressure, and compressibility factor.

So, it is necessary to prepare temperature and pressure regulation systems for all urban and rural gas pressure reduction stations, industrial units, and natural gas stations and install them on turbine meters.

When gas pressure and temperature change, the volume of gas changes accordingly, and the turbine meter measures the volume of gas passing through measuring the speed.

This means that the measurement is done by hitting the gas flow with a vane wheel and counting the number of rotations.

Electronic boards are used in regulators to standardize the gas volume by means of sensors in the pressure and temperature section.

Displaying the volume measured by the meter, measuring the gas temperature and pressure, and calculating the compressibility coefficient are among the advantages of the domestically produced regulator.

Measuring the gas flow rate, displaying the measured and calculated data, alarm management, database management, multiple communication channels for local and remote operations, and the two-mode inputs and outputs are some other advantages.

4155/g